This is just a quick guide to help people load routes onto their Garmin’s for successful cycling navigation.
- Get your device set up right
- Get a route onto the device
- Ride with the navigation enabled
You need to make sure the right options are set on your garmin, or you won’t get turn by turn direction and you’ll get all sorts off odd behaviour. It varies by garmin. I only have a 705. Important thing is to turn recalculate off on all garmins, or generally it finds the quickest way to the end. Which given most rides for us start and end in the same place makes for short, confused rides 🙂 You may also need to turn on “stay on roads” or whatever the option is.
For turn by turn directions, like a car satnav on a 705, 800 or 810, you need to use GPX files. Unfortunately, Garmin Connect downloads the TCX option to your device. Which is why I re-draw club routes on strava as that lets me export the GPX file. GPX files go in the GPX folder on your garmin when plugged in to your computer.
500 it seems gives your best navigation option with a TCX file.
To get a route on your device from Garmin Connect, make sure you:
- Install Garmin Express
- Visit the course
- Click send to device
It should then be on your device as a TCX.
If you want a file from Strava, Click Export, pick your device type and follow the instructions (use the GPX file unless you have a 500/510).
When riding, choose the route to navigate.
Now, bit vague with these instructions, but, there are more detailed Ride with GPS specific details on the Ride with GPS support pages here. I will try and improve the info here when I have more time. Grab me at the start of a Club run if you can and I’ll see if there’s anything I can do to help, or grab me on Facebook.